New York Door
These louvered doors are seen throughout New England on the exterior of many homes. They are a traditional stile and rail blind with true mortise and tenon joints, large slats, and a 4” bottom rail. The edges are eased all around to warm up their appearance. With our roller hangers and 1 “ track the New York door lets the light in while providing great privacy.
Read the measuring instructions to figure your width measurement.
Order 1 for a 2 panel set.
Order 2 for a 4 panel set.
Measuring for Barn Door
Always measure in inches
A – measure the total width of your opening from outside of casing or trim. If you are using a single barnfold hardware kit ( 2 panels ) please divide this measurement by 2. If you using a double barnfold hardware kit ( 4 panels ) please divide this measurement by 4. Specify this width measurement as the size you will need. There is a minimum of 48″ required for 4 panels.
B – Measure height from the floor to the top of the trim. This measurement does not have to be exact as you can adjust ledger board on install for proper fit.
With both the width and height measurements select the closest shutter size that fits your window. If one of the standard sizes do not fit your window, please contact us.
PLEASE BE SURE TO DOUBLE CHECK YOUR MEASUREMENTS